Contact
Feedback
{ "searchTerm": "Search suggestions", "productName":"Products", "productFamily": "Product families", "download": "Downloads", "content": "More content" }
Information
The DGS3x product family has been discontinued. You will find possible successors below. If no product family is displayed, there is no 1:1 replacement.
Our sales department would be happy to assist you.
DGS80
Incremental encoders DGS80
  • Pulse per revolution: Up to 8,192
  • Housing diameter: 81 mm, diameter of through hollow shaft: 30 mm or 42 mm
  • Enclosure rating: IP65
  • Communication interfaces: TTL, HTL
  • Connection types: M12, M23 and MS male connector and cable
  • Collets available as accessories for adjusting to shafts of different size

Incremental encoders
DGS3x

Large hollow shaft encoders for rough environmental conditions

Your Benefits

  • The high output frequency means that mechanical gear reduction is not required.
  • Hollow shaft design does not require couplings or mounting bracket.
  • Large selection of stator couplings available for virtually any AC asynchronous motor

DGS3x

Overview

Large hollow shaft encoders for rough environmental conditions

The high-resolution DGS34/DGS35 hollow shaft incremental encoder family is a rugged solution for very challenging encoder applications. With generous hollow shaft diameters of up to 1-1/8" or 30 mm, they are ideal for mounting directly on the motor shaft.

At a glance
  • Incremental encoder Ø 3.5"
  • Electrical interface
  • 5V TTL / RS422
  • 8 … 24V TTL / RS422
  • 8 … 24V HTL / push pull
  • 8 … 24V Open Collector"
  • Blind hollow shaft Ø 30 mm; 1”, ½”,5/8”, ¾”, 7/8”
  • Cable connection with 1 m, 1.5 m, 3 m, 5 m, 10 m
  • Number of lines 120 … 16,384

Applications

Technical overview

 
Show all
Hide all
  • Technical data overview

    Technical data overview

    Pulses per revolution120 … 16,384
    Mechanical designBlind hollow shaft / through hollow shaft
    Shaft diameter

    1" 1)

    30 mm 2)

    Connection type

    Cable, 11-wire, radial

    Male connector, MS, 10-pin, radial

    Communication interfaceIncremental
    Communication Interface detail

    HTL / Push pull

    TTL / RS-422

    TTL / HTL

    Open Collector

    Supply voltage

    8 ... 24 V

    4.5 ... 5.5 V

    5 ... 15 V

    Enclosure ratingIP66
    Programmable/configurable–
    Output frequency

    300 kHz

    600 kHz

    Operating temperature range–20 °C ... +70 °C
    • 1) Separately order collets for 1/2", 3/4”, 5/8”, 7/8”, 10 mm, 12 mm, 14 mm, 15 mm, 18 mm, 20 mm, 22 mm, 24 mm and 25 mm as accessories.
    • 2) Separately order collets for 24 mm and 25 mm as accessories.
Show all
Hide all
All technical data can be found accompanying the individual product

Downloads

Product portfolio
ImprintTerms and conditionsTerms of usePrivacy Policy© 2023 SICK AG