Contact
Feedback

Motor feedback systems rotary HIPERFACE®
SRS/SRM50

Your Benefits

  • Motor feedback system with HIPERFACE® interface
  • High shock/vibration resistance thanks to built-in metal code disk
  • Consistent motor design due to identical size of single and multiturn design
  • To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.
  • Very smooth running thanks to maximum ball bearing distance

Overview

Used worldwide in a large variety of applications and environments - motor feedback systems of the SRS/SRM50 product family. With 1024 sine/cosine signals per revolution, this family represents the high-end solution of motor feedback systems with HIPERFACE® interface. They use a precise metal code disk and the largest possible distance between the two ball bearings. Absolute location indication with an increment number of 32,768 increments per revolution and a maximum of 4,096 revolutions. Storage of motor-specific data in the electronic type label and the programming are important features of this product family. The motor feedback systems certified to SIL2/PL d meet current requirements with regard to safety technology and make the certification process easier.

At a glance
  • Motor feedback systems for the top performance range
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Insert shaft or tapered shaft with various torque supports
  • Integrated version, mounted version or stand-alone design
  • Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)
  • Conforms to RoHs

 

Mobile robots:
Move into new dimensions

Robotics is on the move, whether it be in production, logistics or service. Sensor solutions for all variants of mobile robots

Find out more

Applications

Technical overview

 
  • Technical data overview

    Technical data overview

    TypeFor integration / Stand-alone
    ModelAbsolute Multiturn / Absolute Singleturn
    Communication interfaceHIPERFACE®
    Sine/cosine periods per revolution1,024
    Safety system– / ✔
    Mechanical interface

    Solid shaft, face mount flange, 10 m, 19 mm

    Plug-in shaft, Rubber support, 17.7 mm

    Tapered shaft, Rubber support, 9 mm

    Tapered shaft, Spring mounting plate, 9 mm

    Tapered shaft, Resolver support, 9 mm

    Blind hollow shaft, 29.5 mm

    Solid shaft, Square flange, 22.1 mm

    Solid shaft, Servo flange, 6 mm, 10 mm

    Connection type

    Male connector, M23, 12-pin, radial

    Male connector, 8-pin, radial

    Cable, 8-wire, radial, 0.2 m

    Cable, 8-wire, radial, 2 m

    Male connector, MS, 10-pin, radial

    Cable, 8-wire, radial, 1.5 m

    Available memory area

    128 Byte E2PROM 512

    1,792 Byte E2PROM 2048

    Measurement principleOptical
All technical data can be found accompanying the individual product

Downloads