Contact
Feedback

Displacement measurement sensors
OD5000

The expert for high performance measurement

Your Benefits

  • Very good measurement performance, even with quick or rotating objects thanks to high measuring frequency
  • Simple and cost-effective solution with Ethernet interface and evaluation unit integrated directly in the sensor head
  • Sensor is easy to configure via a web server interface
  • Reliable edge detection thanks to innovative analysis algorithm
  • Increase in product quality due to maximum repeatability
  • Reliable detection, even of very small indentations, thanks to precise light spot

Overview

The expert for high performance measurement

The OD5000 displacement measurement sensor specializes in high-precision measuring tasks, offering solutions in a wide range of applications. With a measuring frequency of up to 80 kHz, the OD5000 also measures quick and rotating measuring objects with µm-precision. The innovative analysis algorithm allows stable measurements with the highest level of repeatability on a wide range of surfaces. What's more, the OD5000 measures the thickness of transparent material with minimal effort with just a sensor head. The Ethernet interface integrated directly in the sensor head ensures quick communication and therefore maximum productivity.

At a glance
  • Measuring frequency up to 80 kHz
  • Ethernet interface with TCP/IP protocol directly in the sensor head
  • Web server interface for configuration
  • Innovative analysis algorithm
  • Maximum repeatability for positioning tasks
  • Detection and measurement of the smallest indentations or holes

Benefits

Simple and cost-effective solution with Ethernet interface directly in the sensor head

Thanks to the Ethernet interface installed in the sensor head, quick and direct communication is possible via TCP/IP and UPD/IP protocols. The integration of an external amplifier or evaluation unit is not necessary. However, the OD5000 can be connected to the AOD1 evaluation unit as an option to make thickness measurements with two sensor heads.

OD5000 – displacement measurement sensor

Measuring frequencies of up to 80 kHz for increased measurement performance even at high speeds
Easy parameterization and commissioning via web server interface
Small light beam diameter for measurement of the smallest objects and recesses

Quick communication for maximum productivity and product quality

Applications

Technical overview

 
  • Technical data overview

    Technical data overview

    Measuring range

    14 mm ... 190 mm

    25 mm ... 35 mm 1)

    65 mm ... 105 mm 2)

    Linearity± 1 µm ... ± 32 µm
    Repeatability0.01 µm ... 0.2 µm 3) 4)
    Response time≥ 12.5 µs 5) 6)
    Measuring frequency≤ 80 kHz
    Switching output

    1 x PNP/NPN

    2 x PNP/NPN

    3 x PNP/NPN

    Ethernet✔ , TCP/IP, UDP
    PROFIBUS DP✔ , optional, over external evaluation unit
    Analog output1 x 4 mA ... 20 mA (≤ 300 Ω) 7)
    Ambient temperature operation–10 °C ... +50 °C, Operating temperature at VS = 24 V
    Ambient storage temperature–20 °C ... +60 °C
    • 1) If there are reflections, the measuring range is reduced to 22.5 mm ... 28.5 mm.
    • 2) If there are reflections, the measuring range is reduced to 71.5 ... 91.5 mm.
    • 3) Measurement on 60 % remission (ceramic, white).
    • 4) Set average: 65536, median: 31, response time: 50 µs, constant application parameters.
    • 5) At 0.0125 ms, measurement is only possible within a sub-range.
    • 6) Dependent on the set average or sensitivity.
    • 7) Optional over evaluation unit AOD1.
All technical data can be found accompanying the individual product

Downloads

TOP