Contact
Feedback

Linear encoders
MAX®

Integrated cylinder position measurement for mobile machines

Your Benefits

  • Magnetostriction: Reliable, safe and wear-free
  • 100% mechanical and electrically compatible with existing cylinder constructions
  • Save-spacing installation: Better utilization of the piston stroke in tight installation space of the cylinder
  • Extremely stable signal behavior and very good EMC properties: Resistant to extreme electrical influences, such as radiated or coupled faults in the on-board power supply
  • Status monitoring: Monitoring of piston strokes, operating hours and max. oil temperature provides a statement about the cost-optimized operation of the machine
  • Favorable cost-benefit ratio

Product selection

MAX®.ui.config.teaser.header.msg

Individual product configuration

MAX®.ui.config.teaser.configuration.msg

Standard products

MAX®.ui.config.teaser.productselection.msg

Show all Hide all
Show all Hide all
Filter by:

Your desired configuration is being checked...

The configuration result cannot yet be generated. Please complete the missing inputs - the exclamations marks show the missing inputs, or you can contact us.

268 results:

Result 1 - 24 out of 268

View:

Linear encoders
MAX®
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 250 mm
  • Damping: 30 mm
  • Connection type: Male connector, 4-pin
  • Communication interface: Analog / Voltage
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • PIN and wire assignment: 1=V DC, 2=n.c., 3=GND, 4=SIG
  • Resolution: Typ. 0.1 mm (noise-free)
Details
Compare now
Piece
Linear encoders
MAX®
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 1,100 mm
  • Damping: 30 mm
  • Connection type: Male connector, 4-pin
  • Communication interface: Analog / Voltage
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • PIN and wire assignment: 1=V DC, 2=n.c., 3=GND, 4=SIG
  • Resolution: Typ. 0.1 mm (noise-free)
Details
Compare now
Linear encoders
MAX®
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 1,200 mm
  • Damping: 30 mm
  • Connection type: Male connector, 4-pin
  • Communication interface: Analog / Voltage
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • PIN and wire assignment: 1=V DC, 2=n.c., 3=GND, 4=SIG
  • Resolution: Typ. 0.1 mm (noise-free)
Details
Compare now
Linear encoders
MAX®
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 750 mm
  • Damping: 30 mm
  • Connection type: Male connector, 4-pin
  • Communication interface: Analog / Voltage
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • PIN and wire assignment: 1=V DC, 2=n.c., 3=GND, 4=SIG
  • Resolution: Typ. 0.1 mm (noise-free)
Details
Compare now
Linear encoders
MAX®
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 900 mm
  • Damping: 30 mm
  • Connection type: Male connector, 4-pin
  • Communication interface: Analog / Voltage
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • PIN and wire assignment: 1=V DC, 2=n.c., 3=GND, 4=SIG
  • Resolution: Typ. 0.1 mm (noise-free)
Details
Compare now
Linear encoders
MAX®
  • Diameter of the pressure pipe: 7 mm
  • Measuring range: 0 mm ... 200 mm
  • Damping: 30 mm
  • Connection type: Male connector, 4-pin
  • Communication interface: Digital / CANopen
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • PIN and wire assignment: 1=n.c., 2=V DC, 3=GND, 4=CAN_H, 5=CAN_L
  • Resolution: Typ. 0.1 mm (noise-free)
Details
Compare now
Linear encoders
MAX®
  • Diameter of the pressure pipe: 7 mm
  • Measuring range: 0 mm ... 100 mm
  • Damping: 30 mm
  • Connection type: Male connector, 4-pin
  • Communication interface: Digital / CANopen
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • PIN and wire assignment: 1=n.c., 2=V DC, 3=GND, 4=CAN_H, 5=CAN_L
  • Resolution: Typ. 0.1 mm (noise-free)
Details
Compare now
Linear encoders
MAX®
  • Diameter of the pressure pipe: 7 mm
  • Measuring range: 0 mm ... 330 mm
  • Damping: 30 mm
  • Connection type: Male connector, 4-pin
  • Communication interface: Digital / CANopen
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • PIN and wire assignment: 1=n.c., 2=V DC, 3=GND, 4=CAN_H, 5=CAN_L
  • Resolution: Typ. 0.1 mm (noise-free)
Details
Compare now
Linear encoders
MAX®
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 250 mm
  • Damping: 30 mm
  • Connection type: Male connector, 5-pin
  • Communication interface: Digital / CANopen
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • PIN and wire assignment: 1=V DC, 2=n.c., 3=GND, 4=CAN_H, 5=CAN_L
  • Resolution: Typ. 0.1 mm (noise-free)
Details
Compare now
Linear encoders
MAX®
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 300 mm
  • Damping: 30 mm
  • Connection type: Connecting cable, 3-wire, 300 mm
  • Communication interface: PWM
  • Supply voltage: 24 V DC (8 V DC ... 36 V DC)
  • Resolution: Typ. 0.1 mm (noise-free)
Details
Compare now
Linear encoders
MAX®
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 300 mm
  • Damping: 30 mm
  • Connection type: Male connector, 4-pin
  • Communication interface: Analog / Voltage
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • PIN and wire assignment: 1=V DC, 2=SIG, 3=GND, 4=n.c.
  • Resolution: Typ. 0.1 mm (noise-free)
Details
Compare now
Linear encoders
MAX®
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 270 mm
  • Damping: 63 mm
  • Connection type: Male connector, 5-pin
  • Communication interface: Digital / CANopen
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • PIN and wire assignment: 1=n.c., 2=V DC, 3=GND, 4=CAN_H, 5=CAN_L
  • Resolution: Typ. 0.1 mm (noise-free)
Details
Compare now
Linear encoders
MAX®
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 300 mm
  • Damping: 30 mm
  • Connection type: Male connector, 5-pin
  • Communication interface: Digital / SAE J1939
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • PIN and wire assignment: 1=V DC, 2=n.c., 3=GND, 4=CAN_H, 5=CAN_L
  • Resolution: Typ. 0.1 mm (noise-free)
Details
Compare now
Linear encoders
MAX®
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 200 mm
  • Damping: 30 mm
  • Connection type: Male connector, 4-pin
  • Communication interface: Analog / Voltage
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • PIN and wire assignment: 1=V DC, 2=n.c., 3=GND, 4=SIG
  • Resolution: Typ. 0.1 mm (noise-free)
Details
Compare now
Linear encoders
MAX®
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 270 mm
  • Damping: 63 mm
  • Connection type: Male connector, 5-pin
  • Communication interface: Digital / CANopen
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • PIN and wire assignment: 1=n.c., 2=V DC, 3=GND, 4=CAN_H, 5=CAN_L
  • Resolution: Typ. 0.1 mm (noise-free)
Details
Compare now
Linear encoders
MAX®
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 2,000 mm
  • Damping: 36 mm
  • Connection type: Male connector, 4-pin
  • Communication interface: Analog / Current
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • PIN and wire assignment: 1=V DC, 2=n.c., 3=GND, 4=SIG
  • Resolution: Typ. 0.1 mm (noise-free)
Details
Compare now
Linear encoders
MAX®
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 400 mm
  • Damping: 30 mm
  • Connection type: Male connector, 4-pin
  • Communication interface: Analog / Voltage
  • Supply voltage: 12 V DC (8 ... 16 V DC)
  • PIN and wire assignment: 1=V DC, 2=SIG, 3=GND, 4=n.c.
  • Resolution: Typ. 0.1 mm (noise-free)
Details
Compare now
Linear encoders
MAX®
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 200 mm
  • Damping: 30 mm
  • Connection type: Male connector, 5-pin
  • Communication interface: Digital / CANopen
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • PIN and wire assignment: 1=n.c., 2=V DC, 3=GND, 4=CAN_H, 5=CAN_L
  • Resolution: Typ. 0.1 mm (noise-free)
Details
Compare now
Linear encoders
MAX®
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 200 mm
  • Damping: 30 mm
  • Connection type: Male connector, 4-pin
  • Communication interface: Analog / Current
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • PIN and wire assignment: 1=n.c., 2=V DC, 3=GND, 4=SIG
  • Resolution: Typ. 0.1 mm (noise-free)
Details
Compare now
Linear encoders
MAX®
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 180 mm
  • Damping: 30 mm
  • Connection type: Male connector, 5-pin
  • Communication interface: Digital / CANopen
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • PIN and wire assignment: 1=n.c., 2=V DC, 3=GND, 4=CAN_H, 5=CAN_L
  • Resolution: Typ. 0.1 mm (noise-free)
Details
Compare now
Linear encoders
MAX®
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 1,200 mm
  • Damping: 63 mm
  • Connection type: Male connector, 4-pin
  • Communication interface: Analog / Current
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • PIN and wire assignment: 1=n.c., 2=V DC, 3=GND, 4=SIG
  • Resolution: Typ. 0.1 mm (noise-free)
Details
Compare now
Linear encoders
MAX®
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 400 mm
  • Damping: 63 mm
  • Connection type: Connecting cable, 3-wire, 2,000 mm
  • Communication interface: Analog / Voltage
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • Resolution: Typ. 0.1 mm (noise-free)
Details
Compare now
Linear encoders
MAX®
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 800 mm
  • Damping: 63 mm
  • Connection type: Male connector, 4-pin
  • Communication interface: Analog / Current
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • PIN and wire assignment: 1=n.c., 2=V DC, 3=GND, 4=SIG
  • Resolution: Typ. 0.1 mm (noise-free)
Details
Compare now
Linear encoders
MAX®
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 575 mm
  • Damping: 36 mm
  • Connection type: Connecting cable, 3-wire, 3,000 mm
  • Communication interface: Analog / Current
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • Resolution: Typ. 0.1 mm (noise-free)
Details
Compare now

Result 1 - 24 out of 268

    Overview

    Integrated cylinder position measurement for mobile machines

    The MAX48 linear encoder enables non-contact, completely integrated and absolute position measurement in hydraulic cylinders. Suitable for use under extreme ambient and operating conditions in applications in mobile machines. The innovative technology of magnetostriction offers high reliability, expanded diagnostic functions and well as a considerable reduction in operating costs. The 48 mm housing can be easily installed in the existing cylinder construction. All in all, linear encoders from SICK impress with their attractive cost-benefit ratio.

    At a glance
    • Measuring range: 50 to 2,500 mm (1 mm steps), typical resolution 0.1 mm
    • Analog, CANopen, SAE J1939 and PWM interfaces are available
    • Pressure-resistant housing, designed for hydraulic operating pressure of up to 400 bar
    • High operating temperature (electronics) up to +105 °C
    • Fluid temperature (hydraulic oil) up to max. +95 °C
    • Compact dimensions: 10 mm installation space, 30 mm damping zone
    • Position magnet does not need a spacer disk

    Applications

    Technical overview

     
    • Technical data overview

      Technical data overview

      Measuring length≥ 50 mm
      Communication interfaceAnalog, PWM, Digital
      Communication Interface detailCurrent / Voltage / CANopen / SAE J1939
      ResolutionTyp. 0.1 mm (noise-free)
      Connection type

      Male connector, 4-pin

      Connecting cable, 3-wire

      Male connector, 5-pin

      Male connector, M12, 5-pin

      Without electrical connection

    All technical data can be found accompanying the individual product

    Downloads

TOP