Gas flow measuring instruments
FLOWSIC200
Your Benefits
- Representative measurement across total tunnel width
- Very reliable measurement, compared with punctual measurement methods
- Accurate measurement even of very low flow velocities
- Long maintenance intervals of up to 5 years
- Low operating costs due to reliable operation and low maintenance
- High availability of devices and, therefore, of measurement data also
In accordance with Article 2 (4), this product does not fall within the scope of RoHS directive 2011/65/EU and is also not designed for use in products which fall within the scope of this directive. You can find additional information in the product information.
Overview
The FLOWSIC200 is used for the contact-free and accurate measurement of flow velocity and flow direction inside tunnels or exhaust ventilation ducts. Ultrasonic technology provides the cross-sectional mean average value of the flow velocity. This device is used for measurement necessary for optimal ventilation control and reducing running costs to a minimum when air flow is dictated by climatic conditions or by traffic.
In case of fires in tunnels the accurate, reliable and representative measurement of air velocity and direction across the tunnel is mandatory. This is the only way to check reliably the smoke propagation and to achieve the necessary information for optimal control of the ventilation system.
- Very large measuring distances possible
- Non-contact measurement
- Extremely rugged components made of titanium, stainless steel, or die cast
- Versions for very corrosive tunnel atmospheres
- Determination of flow direction
- No mechanical moving parts
Follow expert discussion in our LinkedIn Forum
SICK expert group: gas flow measurement and fiscal metering